Mounting Un-Mounted Stamps On Cling Cushion

We will walk you through the very easy instructions for mounting Two Nancy's Art Stamps deeply etched rubber images sheets on The Original EZ Mount Stamp N' Store system mounting cushion. This cushion is a Sunday International Craft Product and is by far the very best!

The only supplies necessary are you're Two Nancy's Art Stamp imaged rubber, KAI Scissors, and of course, Mounting Cushion. And, when you are ready to make that first impression with you're Two Nancy's Art Stamps: You will only need an Acrylic Block, and Ink.

Two Nancy's Art Stamp Sheets measure 5.5" x 8.5". We chose to produce our stamps this size so that two sheets could be mounted on one 8.5" x 11" mounting cushion.

Let's get Started!

Step 1: Clean off the smooth side of you're rubber stamp sheet to prepare it for mounting & let Dry.

Step 2: Peel the EZ Release printed liner from one side of the cushion to expose the adhesive on the EZ Mount foam.

(With our stamp sheets, you can just peel the printed liner halfway back, because our stamp sheets will fit perfectly on half of the sheet of cushion. And, of course you will have the other half for you're other unmounted stamp sheet)

Step 3: Press your clean rubber (Smooth Side) onto the exposed adhesive.

Step 4: Cut your stamps out close to the image using KAI Scissors.

Step 5: After Cutting, peel the liner off the static cling side of the EZ Mount Foam.

Step 6: Press your cut out stamp piece onto an acrylic block and you are ready to stamp!

Keep you're stamp pieces clean by storing them in binders using EZ Mount Lightweight Storage Panels.

If the static cling side of your EZ Mount foam becomes dusty or dirty, simply wipe off with a damp soft cloth.

WWW.TWONANCYSARTSTAMPS.COM STORE WILL BE ADDING TO OUR SUPPLIES OFFERED ON A REGULAR BASIS. If you do not find what you are looking for, please write us and we will make every effort to get you that product, whenever possible.